all-drum.com

1. TECHNICAL PARAMETERS OF DRUM MOTORS

home page home page  / 1.technical parameters
Clear
Type drum motor
(basic diameter)		 80S113S80i113i138i165i217i80D88D113D
Shell length (SL)
P1 - Rated power (kW) all0.0740.090.1490.180.2070.250.3060.370.4550.550.620.750.8261
n2 - Rated revolutions of the drum shell (rpm)
M2 - Rated torque of drum motor (Nm)
V2 - Rated velocity of the shell (m/s)
F2 - Rated belt pull of drum motor (N)
Clear
drum motor
Select the drum motor in three steps - parameters, complete set, drawings and the request.

138i drum motor

shell length (SL) - 300 mm
steel gear material
asynchronous motor

<< < 1 | 2 | 3 | 4 | 5 > >>   
Type P1 (kW) n2 (rpm) M2 (Nm) V2 (m/s) F2 (N) Sorting 77 pos.
138i 0,826 222 34 1,58 500
138i 0,306 81 34,4 0,577 506
138i 0,55 140 35,6 1,01 516
138i 0,455 111 36,6 0,793 538
138i 1 223 40,9 1,611 593
138i 0,62 140 40,6 0,993 597
<< < 1 | 2 | 3 | 4 | 5 > >>

Besides, any technical solutions, contact us.
© www.all-drum.com , 2017
+7(343)236-44-44   UralReduktor