all-drum.com

1. TECHNICAL PARAMETERS OF DRUM MOTORS

home page home page  / 1.technical parameters
Clear
Type drum motor
(basic diameter)		 80S113S80i113i138i165i217i80D88D113D
Shell length (SL)
P1 - Rated power (kW) all0.3060.370.4550.550.620.750.9091.11.241.51.8182.2
n2 - Rated revolutions of the drum shell (rpm)
M2 - Rated torque of drum motor (Nm)
V2 - Rated velocity of the shell (m/s)
F2 - Rated belt pull of drum motor (N)
Clear
drum motor
Select the drum motor in three steps - parameters, complete set, drawings and the request.

165i drum motor

shell length (SL) - 400 mm
steel gear material
asynchronous motor

<< < 1 | 2 | 3 | 4 | 5 > >>   
Type Sorting P1 (kW) n2 (rpm) M2 (Nm) V2 (m/s) F2 (N) 89 pos.
165i 1,24 113 101 0,955 1247
165i 1,5 113 122,2 0,967 1490
165i 0,909 231 36,1 1,96 445
165i 2,2 194 104,2 1,664 1270
165i 0,37 94 38 0,806 464
165i 1,1 194 51,9 1,667 633
<< < 1 | 2 | 3 | 4 | 5 > >>

Besides, any technical solutions, contact us.
© www.all-drum.com , 2017
+7(343)236-44-44   UralReduktor