all-drum.com

1. TECHNICAL PARAMETERS OF DRUM MOTORS

home page home page  / 1.technical parameters
Clear
Type drum motor
(basic diameter)		 80S113S80i113i138i165i217i80D88D113D
Shell length (SL)
P1 - Rated power (kW) all0.3060.370.4550.550.620.750.9091.11.241.51.8182.2
n2 - Rated revolutions of the drum shell (rpm)
M2 - Rated torque of drum motor (Nm)
V2 - Rated velocity of the shell (m/s)
F2 - Rated belt pull of drum motor (N)
Clear
drum motor
Select the drum motor in three steps - parameters, complete set, drawings and the request.

165i drum motor

shell length (SL) - 400 mm
steel gear material
asynchronous motor

<< < 1 | 2 | 3 | 4 | 5 > >>   
Type P1 (kW) Sorting n2 (rpm) M2 (Nm) V2 (m/s) F2 (N) 89 pos.
165i 0,37 10 339,6 0,084 4142
165i 0,455 14 301,9 0,115 3727
165i 0,455 18 225,3 0,154 2782
165i 0,55 18 272,6 0,156 3324
165i 0,55 14 365,2 0,116 4453
165i 0,62 22 252,3 0,187 3114
<< < 1 | 2 | 3 | 4 | 5 > >>

Besides, any technical solutions, contact us.
© www.all-drum.com , 2017
+7(343)236-44-44   UralReduktor