all-drum.com

1. TECHNICAL PARAMETERS OF DRUM MOTORS

home page home page  / 1.technical parameters
Clear
Type drum motor
(basic diameter)		 80S113S80i113i138i165i217i80D88D113D
Shell length (SL)
P1 - Rated power (kW) all0.0740.090.1490.180.2070.250.3060.370.4550.550.620.750.8261
n2 - Rated revolutions of the drum shell (rpm)
M2 - Rated torque of drum motor (Nm)
V2 - Rated velocity of the shell (m/s)
F2 - Rated belt pull of drum motor (N)
Clear
drum motor
Select the drum motor in three steps - parameters, complete set, drawings and the request.

138i drum motor

shell length (SL) - 300 mm
steel gear material
asynchronous motor

<< < 1 | 2 | 3 | 4 > >>   
Type P1 (kW) n2 (rpm) M2 (Nm) V2 (m/s) Sorting F2 (N) 77 pos.
138i 0,18 17 96 0,121 1391
138i 0,37 19 174,4 0,133 2527
138i 0,306 19 143 0,133 2103
138i 0,37 22 150,1 0,157 2175
138i 0,306 27 99,6 0,194 1465
138i 0,37 27 121,4 0,195 1760
<< < 1 | 2 | 3 | 4 > >>

Besides, any technical solutions, contact us.
© www.all-drum.com , 2017
+7(343)236-44-44   UralReduktor