all-drum.com

1. TECHNICAL PARAMETERS OF DRUM MOTORS

home page home page  / 1.technical parameters
Clear
Type drum motor
(basic diameter)		 80S113S80i113i138i165i217i80D88D113D
Shell length (SL)
P1 - Rated power (kW) all0.3060.370.4550.550.620.750.9091.11.241.51.8182.2
n2 - Rated revolutions of the drum shell (rpm)
M2 - Rated torque of drum motor (Nm)
V2 - Rated velocity of the shell (m/s)
F2 - Rated belt pull of drum motor (N)
Clear
drum motor
Select the drum motor in three steps - parameters, complete set, drawings and the request.

165i drum motor

shell length (SL) - 400 mm
steel gear material
asynchronous motor

<< < 1 | 2 | 3 | 4 | 5 > >>   
Type P1 (kW) n2 (rpm) M2 (Nm) V2 (m/s) Sorting F2 (N) 89 pos.
165i 0,62 22 252,3 0,187 3114
165i 0,37 22 158,5 0,189 1933
165i 0,909 28 288,2 0,24 3558
165i 1,1 28 348,8 0,243 4254
165i 0,75 29 231,8 0,25 2827
165i 0,62 30 188,3 0,251 2325
<< < 1 | 2 | 3 | 4 | 5 > >>

Besides, any technical solutions, contact us.
© www.all-drum.com , 2017
+7(343)236-44-44   UralReduktor